Offline cache warming

MetaCAD Pocket — marine tools, offline

Voyage tools, calculations and sea service — on iPhone and Android.

Features and platform differences

Cargo Operations Course (bulker & tanker)

In short

This course teaches how to run cargo operations safely: build a loading plan, plan the loading/discharge sequence, keep hull strength (SF/BM) and stability within limits at every step, and compute grain stability. For bulker and tanker mates and cadets. Built on SOLAS Ch. VI/VII, the CSS Code and the grain requirements.

Enrol / request the programme

Leave your contact — we will send the programme, terms and schedule. Never published.

The hazard of cargo operations lies not in the final state but in the intermediate steps: a ship can be fine on arrival yet overstress the hull mid-loading. We teach control at every step.

Programme

  • 1.Deadweight distribution and the loading plan
  • 2.The loading/discharge sequence and SF/BM limits
  • 3.Controlling stability and trim through the operation
  • 4.Grain stability and the IMSBC
  • 5.The specifics of tanker operations

What you will be able to do

  • ✓Build a loading plan checked for strength and stability
  • ✓Plan a safe loading sequence
  • ✓Keep SF and BM within limits at every step
  • ✓Compute grain stability and the allowable heel

For whom: Mates on bulk carriers and tankers, and deck-department cadets.

Format: Online, worked on the live loading-plan and strength calculators, a full loading cycle, certificate on completion.

Price: On request via the enrolment form; cadet discount available.

What you will master

Distributing deadweight across holds/tanks and building the loading plan. The loading and discharge sequence with shear force (SF) and bending moment (BM) checked at every step. Controlling stability and trim through the operation. Grain stability: the heeling moment from grain shift and the allowable heel. IMSBC limits and the specifics of tanker operations.

How the course runs

You build the loading plan in the MetaCAD Loading Plan and Strength tools, watching SF/BM along the ship at each stage, and grain stability in the Grain calculator. We work a full multi-port bulker loading cycle.

Why MetaCAD

The tools show the SF/BM diagrams and the margins to the limits, not just in-limit/out — you see which sequence step overstresses the hull. The course rests on SOLAS Ch. VI/VII, the CSS Code and the grain requirements.

Case: a BM overshoot mid-loading

The final plan passes on strength, but loading holds 2 and 4 first sends the midship bending moment over the limit. The student reorders the sequence so SF and BM stay within limits at every step.

Try it in a calculator

Questions

FAQ

How much does the course cost?
The price is on request via the enrolment form; the course is launching and terms are agreed individually. Cadet discount available.
Is a certificate issued?
Yes, a MetaCAD certificate of completion. It confirms training and is not an approval of any specific voyage’s loading plan.
Do I need prior experience?
A grasp of stability and strength helps; the key methods are revised. Suitable for mates and cadets preparing for bulker and tanker work.
What is the format and length?
Online, building a loading plan and checking strength on the calculators. The workload is about 10 hours.

Related lessons

Sources & method

  • — IMO CSS Code — Code of Safe Practice for Cargo Stowage and Securing; SOLAS Ch. VI/VII.
  • — IMO SOLAS / Load Lines 1966.
  • — Barrass & Derrett, Ship Stability for Masters and Mates.

Reviewed by MetaCAD Engineering Review · updated 2026-07-17

By continuing to use this site, you accept essential cookies and anonymous analytics. Learn more